Rrc en 16:21 27 oct 2012

2012-10-27T16:21:07Z

Página nueva

__NOTOC__
* [[:# Instalar el cliente en GNU y Linux | Instalar el cliente en GNU y Linux]]
** [[:#Explicación | Explicación]]
== Instalar el cliente en GNU y Linux ==

<pre>
[rrc@AbelLap ~]$ su -
Password:
[root@AbelLap ~]# urpmi openvpn
To satisfy dependencies, the following packages are going to be installed:
Package Version Release Arch
(medium "Core Release (distrib1)")
lib64pkcs11-helper1 1.09 2.mga2 x86_64
libobjc3 4.6.3 2.mga2 x86_64
openvpn 2.2.2 5.mga2 x86_64
perl-Authen-PAM 0.160.0 4.mga2 x86_64
2.1MB of additional disk space will be used.
688KB of packages will be retrieved.
Proceed with the installation of the 4 packages? (Y/n) y

$MIRRORLIST: media/core/release/openvpn-2.2.2-5.mga2.x86_64.rpm
$MIRRORLIST: media/core/release/libobjc3-4.6.3-2.mga2.x86_64.rpm
$MIRRORLIST: media/core/release/perl-Authen-PAM-0.160.0-4.mga2.x86_64.rpm
$MIRRORLIST: media/core/release/lib64pkcs11-helper1-1.09-2.mga2.x86_64.rpm
installing openvpn-2.2.2-5.mga2.x86_64.rpm libobjc3-4.6.3-2.mga2.x86_64.rpm perl-Authen-PAM-0.160.0-4.mga2.x86_64.rpm lib64pkcs11-helper1-1.09-2.mga2.x86_64.rpm from /var/cache/urpmi/rpms
Preparing... #############################################
1/4: lib64pkcs11-helper1 #############################################
2/4: perl-Authen-PAM #############################################
3/4: libobjc3 #############################################
4/4: openvpn #############################################
[root@AbelLap ~]#
</pre>
<pre>
[root@AbelLap ~]# cd /etc/openvpn/
[root@AbelLap openvpn]# ls -al
total 16
drwxr-xr-x 2 root root 4096 Apr 27 22:20 ./
drwxr-xr-x 131 root adm 12288 Oct 26 15:11 ../
</pre>
<pre>
[root@AbelLap openvpn]# scp rrc@192.168.51.136:rrc-openvpn-config.tar .
Warning: Permanently added '192.168.51.136' (RSA) to the list of known hosts.
rrc@192.168.51.136's password:
rrc-openvpn-config.tar 100% 1410KB 1.4MB/s 00:01
</pre>
<pre>
[root@AbelLap openvpn]# tar xvf rrc-openvpn-config.tar
ca.crt
openvpn-2.2.2-install.exe
rrc.crt
rrc.key
rrc.ovpn
</pre>
<pre>
[root@AbelLap openvpn]# mv rrc.ovpn rrc.conf
</pre>
<pre>
[root@AbelLap openvpn]# ls -al
total 2844
drwxr-xr-x 2 root root 4096 Oct 26 15:24 ./
drwxr-xr-x 131 root adm 12288 Oct 26 15:11 ../
-rw-r--r-- 1 root root 1452 Oct 26 12:39 ca.crt
-rw-r--r-- 1 root root 1426552 Oct 26 12:40 openvpn-2.2.2-install.exe
-rw-r--r-- 1 root root 4106 Oct 26 12:39 rrc.crt
-rw------- 1 root root 916 Oct 26 12:39 rrc.key
-rw------- 1 root root 1443840 Oct 26 15:24 rrc-openvpn-config.tar
-rw-r--r-- 1 root root 191 Oct 26 12:50 rrc.conf
[root@AbelLap openvpn]#
</pre>
<pre>
[root@AbelLap openvpn]# systemctl restart openvpn@rrc.service
</pre>
<pre>
[rrc@AbelLap ~]$ /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 78:E7:D1:DC:B9:A2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:46 Base address:0x4000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.8.0.6 P-t-P:10.8.0.5 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

wlan0 Link encap:Ethernet HWaddr 70:F1:A1:6D:8B:F6
inet addr:192.168.51.160 Bcast:192.168.51.255 Mask:255.255.255.0
inet6 addr: 2002:bda2:69b1:0:72f1:a1ff:fe6d:8bf6/64 Scope:Global
inet6 addr: fe80::72f1:a1ff:fe6d:8bf6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5801 errors:0 dropped:0 overruns:0 frame:0
TX packets:5316 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1971975 (1.8 MiB) TX bytes:773604 (755.4 KiB)
</pre>
<pre>
[root@AbelLap ~]# ip route show
default via 192.168.51.1 dev wlan0 metric 35
10.8.0.1 via 10.8.0.5 dev tun0
10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6
192.168.51.0/24 via 192.168.51.160 dev wlan0 scope link
192.168.51.0/24 dev wlan0 proto kernel scope link src 192.168.51.160 metric 35
[root@AbelLap ~]#
</pre>
<pre>
[rrc@AbelLap ~]$ ssh rrc@10.8.0.1
Warning: Permanently added '10.8.0.1' (RSA) to the list of known hosts.
rrc@10.8.0.1's password:
Last login: Fri Oct 26 15:52:54 2012 from 192.168.51.160
[rrc@localhost ~]$
</pre>

=== Explicación ===

[[Category:OpenVPN-2.1.1HowTo]]

OpenVPN-2.1.1HowTo/Instalar el cliente en GNU y Linux - Historial de revisiones

Rrc en 16:21 27 oct 2012