OpenVPN-2.1.1HowTo/Instalar el cliente en GNU y Linux

De WikiCabal
Ir a la navegación Ir a la búsqueda

Instalar el cliente en GNU y Linux

[rrc@AbelLap ~]$ su -
Password: 
[root@AbelLap ~]# urpmi openvpn
To satisfy dependencies, the following packages are going to be installed:
  Package                        Version      Release       Arch    
(medium "Core Release (distrib1)")
  lib64pkcs11-helper1            1.09         2.mga2        x86_64  
  libobjc3                       4.6.3        2.mga2        x86_64  
  openvpn                        2.2.2        5.mga2        x86_64  
  perl-Authen-PAM                0.160.0      4.mga2        x86_64  
2.1MB of additional disk space will be used.
688KB of packages will be retrieved.
Proceed with the installation of the 4 packages? (Y/n) y


    $MIRRORLIST: media/core/release/openvpn-2.2.2-5.mga2.x86_64.rpm
    $MIRRORLIST: media/core/release/libobjc3-4.6.3-2.mga2.x86_64.rpm           
    $MIRRORLIST: media/core/release/perl-Authen-PAM-0.160.0-4.mga2.x86_64.rpm  
    $MIRRORLIST: media/core/release/lib64pkcs11-helper1-1.09-2.mga2.x86_64.rpm 
installing openvpn-2.2.2-5.mga2.x86_64.rpm libobjc3-4.6.3-2.mga2.x86_64.rpm perl-Authen-PAM-0.160.0-4.mga2.x86_64.rpm lib64pkcs11-helper1-1.09-2.mga2.x86_64.rpm from /var/cache/urpmi/rpms
Preparing...                     #############################################
      1/4: lib64pkcs11-helper1   #############################################
      2/4: perl-Authen-PAM       #############################################
      3/4: libobjc3              #############################################
      4/4: openvpn               #############################################
[root@AbelLap ~]# 
[root@AbelLap ~]# cd /etc/openvpn/
[root@AbelLap openvpn]# ls -al
total 16
drwxr-xr-x   2 root root  4096 Apr 27 22:20 ./
drwxr-xr-x 131 root adm  12288 Oct 26 15:11 ../
[root@AbelLap openvpn]# scp rrc@192.168.51.136:rrc-openvpn-config.tar .
Warning: Permanently added '192.168.51.136' (RSA) to the list of known hosts.
rrc@192.168.51.136's password: 
rrc-openvpn-config.tar                        100% 1410KB   1.4MB/s   00:01    
[root@AbelLap openvpn]# tar xvf rrc-openvpn-config.tar 
ca.crt
openvpn-2.2.2-install.exe
rrc.crt
rrc.key
rrc.ovpn
[root@AbelLap openvpn]# mv rrc.ovpn rrc.conf
[root@AbelLap openvpn]# ls -al
total 2844
drwxr-xr-x   2 root root    4096 Oct 26 15:24 ./
drwxr-xr-x 131 root adm    12288 Oct 26 15:11 ../
-rw-r--r--   1 root root    1452 Oct 26 12:39 ca.crt
-rw-r--r--   1 root root 1426552 Oct 26 12:40 openvpn-2.2.2-install.exe
-rw-r--r--   1 root root    4106 Oct 26 12:39 rrc.crt
-rw-------   1 root root     916 Oct 26 12:39 rrc.key
-rw-------   1 root root 1443840 Oct 26 15:24 rrc-openvpn-config.tar
-rw-r--r--   1 root root     191 Oct 26 12:50 rrc.conf
[root@AbelLap openvpn]# 
[root@AbelLap openvpn]# systemctl restart openvpn@rrc.service
[rrc@AbelLap ~]$ /sbin/ifconfig
eth0      Link encap:Ethernet  HWaddr 78:E7:D1:DC:B9:A2  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:46 Base address:0x4000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:10.8.0.6  P-t-P:10.8.0.5  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

wlan0     Link encap:Ethernet  HWaddr 70:F1:A1:6D:8B:F6  
          inet addr:192.168.51.160  Bcast:192.168.51.255  Mask:255.255.255.0
          inet6 addr: 2002:bda2:69b1:0:72f1:a1ff:fe6d:8bf6/64 Scope:Global
          inet6 addr: fe80::72f1:a1ff:fe6d:8bf6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5801 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5316 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1971975 (1.8 MiB)  TX bytes:773604 (755.4 KiB)
[root@AbelLap ~]# ip route show
default via 192.168.51.1 dev wlan0  metric 35 
10.8.0.1 via 10.8.0.5 dev tun0 
10.8.0.5 dev tun0  proto kernel  scope link  src 10.8.0.6 
192.168.51.0/24 via 192.168.51.160 dev wlan0  scope link 
192.168.51.0/24 dev wlan0  proto kernel  scope link  src 192.168.51.160  metric 35 
[root@AbelLap ~]# 
[rrc@AbelLap ~]$ ssh rrc@10.8.0.1
Warning: Permanently added '10.8.0.1' (RSA) to the list of known hosts.
rrc@10.8.0.1's password: 
Last login: Fri Oct 26 15:52:54 2012 from 192.168.51.160
[rrc@localhost ~]$ 

Explicación